This may have been answered here before, but I have not found it.
Is there a trick to keep the freshly cut edges of fabric from fraying as I apply the epoxy?
I used a strip of fabric, when doing my butt joints and the edges kept coming undone and now I will have to sand them out. Before I start on glassing the bottom, I thought I would ask???
Is there a trick to keep the freshly cut edges of fabric from fraying as I apply the epoxy?
I used a strip of fabric, when doing my butt joints and the edges kept coming undone and now I will have to sand them out. Before I start on glassing the bottom, I thought I would ask???