Search results

You will love the planer. Sanding dust from a belt sander is normally ok but if you have a piece of screen wire or a tea strainer it will work great. A little trick is to use white flour with the wood flour to lighten the color. Ron

Opps Matt If your xy measurements exceed 13 inches you just make that panel in 2 pieces and glue then you have to sand just one joint. Ron

I have done a bunch of straight and curved panels so I am going to go through it step by step. This may get long. Cutting strips if you are using a board with rough edges before you start cutting strips run it through the planer on each side just for a clean up ,it will help you on the...

Stitch your tumble home too Ron

:lol: :lol: :lol: :lol: Ron

I have done panels with sander , scraper ,hand plane and a bench mounted . They will all work ,but there is no comparison between the rest and the bench planer, it leaves you with no humps and bumps and I can do a 17 ft panel in less than 5 min ,with a scraper or sander you are talking hours...

Bench mounted planer

In Centra TX where I live there use to bee fig trees every where now you cant find one. Wonder if the fireants have caused that? Ron

Dan Glass the whole thing or glass nothing , I didnt glass anything before I assembled the boat. You will create hard spots just glass part of the boat. Ron

The only quarantines I know of in Tx is for hog cholera . Ron

As long as pork is cooked properly that isnt a problem. Ron

The hogs are so thick here in Texas it is unreal, the heli hunting is just extermination like they use to do with the wolves and yotes. Ron

Doing 1 1/2 strips isnt a problem . Here is aa perow I built that way viewtopic.php?f=3&t=7988&start=15 If you want 1 inch cedar go to Lowes and look for there 5/4 cedar decking . Ron

Anyone ever use the co2 cylinder you use in a air rifle instead of a pump? Ron